Set Up Static Ip on Xbox One

How to Setup Static IP for Xbox One on D-LINK DCS-2630L camera

This guide will show you how to set a static IP address for your Xbox One using your D-LINK DCS-2630L camera.

How to set up static IP for Xbox One on D-LINK DCS-2630L camera

1. At first, launch your Xbox One console.
2. Then when you are on the home screen press the Xbox button on the pad and the menu should pop up.

   

3. Choose the settings icon and select Settings from the list.

   

   

4. Pick the General section.

   

5. Select Network settings and move to Advanced settings.

   

   

6. Click on IP settings and pick Manual.

   

   

7. Now you need to enter the IPv4 address that you need and go next.

   

   

8. You should enter the Subnet mask too and go to the next section.

   

   

9. At last, you will see Gateway but you can skip this card and click enter.

   

10. Perfect! You have successfully set a static IP address on your Xbox One.

Setting up static IP for Xbox One

1. Start by opening your router's control panel.
2. Click on the More Functions section.

   

3. Select Network Settings from the list and press on the LAN tab.

   

   

4. Scroll down the page.

   

5. Press on Add button.

   

.
6. Now enter the MAC address of your Xbox One console.

   

7. Then write the IP address assigned to your Xbox One. (Make sure that this address is within your router's DHCP range)

   

8. At last, click on the OK key to save your changes.

   

9. Done! The static IP was successfully set up.

   

https://www.hardreset.info/